Cart is empty
http://www.christmaslightshow.com/Virtual-Santa-Claus-in-the-window.html
Lay-Away Available Now at Checkout!
Lay-Away Available Now at Checkout!
Welcome to ChristmasLightShow.Com. All your Outdoor decoration needs for doing an Amazing static display or an Awesome light show!
|
"Virtual Reality Santa Decoration Video with Video Projector"
LED Projector Specifications:
|
On Sale
FM transmitter Features:
Specification:
Power supply voltage: 12V
Operating current: Less than 0.4A
Frequency range: 87 ~ 108Mhz
Frequency step: 100kHz
Frequency stabilization method: PLL
Modulation:FM
Frequency Deviation: ± 75kHz
S/N:morn than 40db
Antenna Connector:BNC type
SNR: 60dB
Audio frequency response: 40Hz~15KHz
Audio distortion: Less than 1%
Modulation: 10%
Input Level:-15dBV
Operation Time:True 24/7
RF output impedance: 50 Ohm
RF output power:0.5w
Reference range: 100m - 1Km (A barrier-free environment)
Dimensions: 110mm(L) *80mm(W) * 30mm(H)
Package includes:
**May come is silver or black
On Sale
| (not water proof) |
This eight sided octagon strobe design breaks the light into infinite beams creating a stunning sparkle. Catch everyone's attention when you place multiple strobes in virtually any position. No modifying this strobe, because it has flash rate of 3 to 4 flashes per second.
 |
||||||
|
Features:
NOTE: Although strobes have protecion from moisture due to new coating over the circuit board, this will only help, but will not eliminate moisture.Weep holes to let air in and out still need to be place in strobes. Build Your Own Shooting Star CLICK HERE!
Ken is using aproximately 120 strobe lights.
|
||||||
| Caution: When using strobes with light controllers, turning them on and off rapidly or using them with fading or lower intensities can damage them. These strobes are not specifically made for outdoors, but have been used successfully outdoors by hundreds of decorators. Since strobes will go in so many different environments it is hard to say who will have problems with condensation, since the new strobes are so air tight we believe that the condensation problem will be reduced or eliminated. Please watch your strobes during the season. If you do have condensation build up, the you will need to place two holes in the end facing the ground. For example, if you hang them in trees the lens cover will be hanging down, so you will need to drill holes in the lens. You can also burn holes in with a soldering iron. If you have the strobes on the ground and see condensation building in the lens, you will need two holes in the bottom of the strobe. I recommend burning holes in this end because you can damage the circuit board if the drill bit hit it. Two holes will make the strobe breathe and dry out better. | ||||||
|
Tips for Placing strobes: On the ground: Placing strobes on the ground is much easier. I personally prefer my strobes to be 4' to 6' apart. I have only seen 3' spacing in c9 light strings, if you have any c9 light stings with 3' spacing, you can skip every other socket and simply place a cap or tape up the empty socket. Each socket can be held up vertically by using c9 socket holders. Now you can easily hang strobes along gutter lines, fence lines by using C9 light string cords. |
||||||
On Sale
On Sale
-01.jpg)
When you are doing an outdoor christmas display, you should have a center piece. That center piece can be an outdoor Christmas tree...
Outstanding videos. More people are talking about Mrs Claus in the window than anything else in our display!
Copyright © 2003-2013 ChristmasLightShow.Com. Credits.
